Midea CONSOLE SCOP MFAU-12HRFN1 Inverter 12.000BTU

TECHNICAL DATA

• Cooling Performance (BTU / h):   12.000
• Thermal Performance (BTU / h): 13.000
• Operation Type: 3D DC Inverter
•  Operating Voltage (V / Ph / Hz):  220-240/1/50
•  Cooling Energy Class: A ++ 
• Heating Energy Class: A++
• SEER: 6.3 W/W
• SCOP: 4.0 W/W
• Noise level (int. / On.): 47/58 dB(A)
• Refrigerant: R-410A
•  Refrigirant piping: liquid / gas area: 1/4 "/ 3/8" 
• Indoor Unit Dimensions (PXBxY): 700x600x210 mm
• Outdoor Unit Dimensions (PxBxY): 770x300x555 mm
•  Indoor Unit Weight: 15/20 kg
•  External Unit Weight:  35 kg

ADDITIONAL FEATURES

• Flexible installation - the air conditioner can be installed on the floor or lower wall.
• Turbo Mode - by pressing the turbo button on the remote controller, the unit will enter turbo mode with ultra-high speed and reach the set temperature more quickly. After running 20 minutes in turbo mode, the indoor fan will automatically recover the preset speed.
• Sleep Mode - the Sleep Mode enables the air conditioner to automatically increase (cooling) or decrease (heating) the temperature with 1˚C per hour for the first two hours, then holds steady for the next 5 hours, after that it will switch off. This characteristic maintains both energy saving and comfort at night.
• Anti-cold Air Function - indoor fan speed is regulated automatically from the lowest grade to the setting grade according to evaporator temperature when the unit just starts heating operation. This function can prevent cold air blowing out to avoid discomfort to the users
• Low Ambient Cooling - with built-in low ambient kit or special designed PCB, outdoor fan speed can be changed automatically according to condensation temperature. The air conditioner can run cooling operation even when the outdoor ambient temperature down to -15℃.
• Louver Position Memory - when you start the unit next time, the angle of horizontal louver will automatically move to the same position as you set last time.
• Emergency Using Function - normally, when a temperature sensor error occurs, the air conditioner will display error code and will stop immediately. With this function, when a temperature sensor error occurs, the air conditioner will display error code but will continue running instead of stopping immediately. This is to avoid situations where the air conditioner is urgently needed.
• Quiet design - without decreasing the flow volume, the large diameter cross flow fan can greatly reduce the noise level of the indoor unit.

Call us for a price